Engine
Cummins QSB5-G6 turbocharged, after-cooled, 208 bhp, 4 cylinder diesel. Meets EPA Mobile Off Highway Tier 3 Flex, and California SCAQMD and CARB permitting requirements. Maximum output: 1100 Amps continuous, 1200 Amps standby @120 Volts.
Frequency Control
Electronic engine management ensures precise frequency control. Meets HMI lighting requirements.
Controller
Engine control and monitoring, AC monitoring, fault and pre-fault systems are provided by a microprocessor-based system. All readouts are digital and are listed below. Weather-proof glass cover.
Monitoring
We are proud to offer the IntelliVision IV-5 LCD 5″ display unit. There are several pages of information to view for generator, engine and maintenance/statistical information as well as a home page that displays typically requested information.
| Main Page Display | Faults and Pre-Faults | Electrical Display |
| AC Voltage – All Legs | Oil Pressure Fault/Pre-Fault | AC Voltage – All Legs |
| Amperage – All Legs | Water Temp Fault/Pre-Fault | Amperage – All Legs |
| Frequency – All Legs | Over Crank Fault | kW – Actual Power |
| Oil Pressure | Over Speed Fault | kVAr – Reactive Power |
| Water Temperature | Low Fuel Fault and Pre-Fault | Frequency – Hz |
| Battery Voltage | Low Battery Pre-Fault | |
| Fuel Level |
PMG Generator
Stamford UCI247F with PMG, 170KW (1,200 amps @ 120V) three phase. 114KW (950 amps @ 120V) single phase @ class H 150 deg rating. CSA listed. PMG provides constant excitation under all conditions. 2/3 pitch windings avoid excessive neutral currents.
Voltage Regulator
MX321 automatic voltage regulator with remote voltage adjustment. Features include:
- Three Phase Sensing for unbalanced
or non-linear loads - Isolation Transformers
- Under frequency roll off
- Voltage dip adjustment
- Droop adjustment
- Trim adjustment
Circuit Breaker
500 amp breaker protects equipment in either single or three phase. Weather-proof glass cover. UL and CSA listed.
Electrical Connection
USA – 18 hole Cam-Lok – E1016 panel includes 3 male grounds, 3 female grounds, 3 neutral, 3 leg one, 3 leg two and 3 leg three. Two Edison 20A outlets with 20A breakers and one 100A Union connector with 100A breaker provided for convenience outlets.
CANADA – Cam-Loc 1016 replaced with 400A Ball Nose Connectors. UL and CSA listed.
Dimensions
Generator: L 84″ W 36″ H 62″
Generator with 150 gallon tank: L 84″ W 73″ H 74″
Generator, 150 gallon tank, trailer: L 154″ W 90″ H 87″
Noise Level
Less than 50 dB(A) @ 50 feet.
Optional Accessories
Remote Annunciator
Remote monitoring of engine and generator via cable. Operates up to 1700 yards. Includes 50′ cable. Available with remote start.
Paralleling System with Vacuum Contactor
“The most advanced, comprehensive paralleling solution available today.” Four functions in one:
- Display and Programming Panel
- Isochronous Load Sharing
- Auto-Synchronizer
- Load Management
Electronic Service Kit
Provides total redundancy of all electronic parts. Each component can be installed in less than ten minutes. Includes:
- ComAp IG-NT Base Box
- ComAp IV-5 Display
- MX321 Voltage Regulator
- Spare Control Relay
480 Volt
277/480 Volt 3 phase is now standard on US models.
Trailer
2 Dexter Torflex axles, 15″ aluminum wheels with C rated tires, surge hydraulic brakes with LitePOWER Brake Retarder or Electric Brakes, 5 position coupler with your choice of 2″ ball, 2-5/16″ ball or drawbar (for Pintle Hook), DOT lighting and markings, 7000 lbs. (3174 kg) GVW standard.
Fuel Tank
150 gallons. Required for LitePOWER trailer but not for truck or stationary mounting. Includes integrated fork pockets and guide pin location for easy mounting to trailer.
Jockey Box Tanks
Dual 60 gallon tanks for truck mounting.
Running Time – with 150 gallon tank
Load
1200A
1100A
825A
550A
275A
% of Load
100%
92%
69%
46%
23%
Hours
14:20
15:45
20:50
28:50
55:30
Weight – Generator
Including fluids: 4015 lbs. (1825 kg)
Weight – Complete Package
Generator, 150 Gallon Tank, Trailer and Fuel: 6400 lbs. (2909 kg)